IPv6 OSPF Routing LAB

   

   

   

위의 토폴로지를 ipv6 망으로 구현하기

   

우선 각 Router들의 총체적인 configuration 정보들을 확인하면

   

V6R1	V6R2	V6R3
interface FastEthernet0/0 ip address 10.10.2.1 255.255.255.0 duplex auto speed auto ipv6 address 2001:1:2::/64 eui-64 ipv6 enable ipv6 ospf 222 area 0 ! interface FastEthernet0/1 ip address 10.10.1.1 255.255.255.0 duplex auto speed auto ipv6 address 2001:1:1::/64 eui-64     ipv6 route ::/0 FastEthernet0/1 ipv6 router ospf 222 router-id 10.10.2.1	interface FastEthernet0/0 ip address 10.10.2.2 255.255.255.0 duplex auto speed auto ipv6 address 2001:1:2::/64 eui-64 ipv6 enable ! interface Serial1/0 bandwidth 1024 ip address 10.10.4.1 255.255.255.0 encapsulation ppp ipv6 address 2001:1:4::/64 eui-64 ipv6 ospf 222 area 0 no fair-queue serial restart-delay 0 ! interface Serial1/1 bandwidth 1024 ip address 10.10.3.1 255.255.255.0 encapsulation ppp ipv6 address 2001:1:3::/64 eui-64 ipv6 enable ipv6 ospf 222 area 0 serial restart-delay 0 ! ipv6 router ospf 222 router-id 10.10.2.2 log-adjacency-changes	interface Loopback0 ip address 10.10.5.1 255.255.255.0 ipv6 address 2001:1:5::/64 eui-64 ipv6 enable ipv6 ospf 222 area 1 ! interface Serial1/0 bandwidth 1024 ip address 10.10.3.2 255.255.255.0 encapsulation ppp ipv6 address 2001:1:3::/64 eui-64 ipv6 enable ipv6 ospf 222 area 0 no fair-queue serial restart-delay 0 ! interface Serial1/1 bandwidth 1024 ip address 10.10.7.1 255.255.255.0 encapsulation ppp ipv6 address 2001:1:7::/64 eui-64 ipv6 enable ipv6 ospf 222 area 1 serial restart-delay 0 ! ipv6 router ospf 222 router-id 10.10.5.1 log-adjacency-changes
V6R4	V6R5
interface Loopback0 ip address 10.10.6.1 255.255.255.0 ipv6 address 2001:1:6::/64 eui-64 ipv6 enable ipv6 ospf 222 area 1 ! interface Serial1/0 bandwidth 1024 ip address 10.10.4.2 255.255.255.0 encapsulation ppp ipv6 address 2001:1:4::/64 eui-64 ipv6 ospf 222 area 0 no fair-queue serial restart-delay 0 ! interface Serial1/1 bandwidth 1024 ip address 10.10.8.1 255.255.255.0 encapsulation ppp ipv6 address 2001:1:8::/64 eui-64 ipv6 enable ipv6 ospf 222 area 1 serial restart-delay 0 ipv6 router ospf 222 router-id 10.10.6.1 log-adjacency-changes !	interface Loopback0 ip address 10.10.9.1 255.255.255.0 ipv6 address 2001:1:9::/64 eui-64 ipv6 enable ipv6 ospf 222 area 1 ! interface Serial1/0 bandwidth 1024 ip address 10.10.8.2 255.255.255.0 encapsulation ppp ipv6 address 2001:1:8::/64 eui-64 ipv6 enable ipv6 ospf 222 area 1 no fair-queue serial restart-delay 0 ! interface Serial1/1 bandwidth 1024 ip address 10.10.7.2 255.255.255.0 encapsulation ppp ipv6 address 2001:1:7::/64 eui-64 ipv6 enable ipv6 ospf 222 area 1 serial restart-delay 0 ! ipv6 router ospf 222 router-id 10.10.9.1 log-adjacency-changes

위와 같다.

   

구성모드에서

ipv6 router ospf <OSPF No.>

router-id <router-id>

를 입력해주고

   

OSPF 프로토콜을 적용해 줄 각 인터페이스에서

ipv6 ospf <OSPF No.> area <AREA No.>

   

만 입력해주면 된다.

   

그럼 자동으로 OSPF 프로토콜이 DB를 동기화하고 업데이트하여 관리하게 된다.